주요 콘텐츠로 건너뛰기

#7단계의 변경 사항

Miroslav Djuric- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

+[* icon_note] Attach the red lead first, followed by the white lead, and finish with the black lead.
+[* black] Place the wire from the new battery onto the new solder bead.
+[* black] Press the tip of the soldering iron onto the solder bead until it melts.
+[* black] Slide the wire lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.
+[* black] Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

이미지 1

이전 이미지 없음

추가