Skip to main content

#8 단계의 변경 사항

davabi- 에 의해 수정

편집 거부됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Remove the following seven screws:
[* red] Six 1.6 mm Phillips screws securing the the trackpad to the upper case.
[* orange] One 1.4 mm T5T6 Torx set screw near the front edge of the upper case.
[* orange] One 1.4 mm T5T6 Torx set screw near the front edge of the upper case.
[* icon_reminder] During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.