#6단계의 변경 사항
Arthur Shi- 에 의해 수정
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항이 없습니다
단계 라인
[* black] Slide the pick along the edge of the display, towards the headphone jack. |
[* black] If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat. |
[* icon_caution] Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display. |
[* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad. |
[* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad. |