주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Evan Noronha- 에 의해 수정

편집 승인됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Slide the pick down along the edge of the iPad, releasing the adhesive as you go until you reach the top left hand corner of the iPad.
+[* black] Slide the pick along the edge of the display, towards the headphone jack.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
-[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, doing so could damage the screen.
- [* icon_note] A good way to avoid this is to never insert the opening pick more than a quarter inch into the iPad.
+[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
+ [* icon_note] A rule of thumb is to never insert the opening pick more than a quarter inch into the iPad.