주요 콘텐츠로 건너뛰기

#24단계의 변경 사항

Paige Reisman- 에 의해 수정

편집 승인됨 완료자 Paige Reisman

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Insert the opening tool underneathon the other side of the rectangular cut out.
[* black] Pry
out on the upper portion of the motherboard and pry it up.
[* black] SlideWhile keeping the opening tool downunderneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener
.
[* black] Insert the opening tool underneathon the other side of the rectangular cut out.
[* black] Pry
out on the upper portion of the motherboard and pry it up.
[* black] SlideWhile keeping the opening tool downunderneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener
.