기기를 수리하세요

수리할 권리

상점

#1단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Reheat the iOpener in the microwave for 30 seconds.
[* [* icon_caution] Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than 30 seconds.
[* black] Place the heated iOpener in the center of the back of the iPad. LetKeep it sit there for 90 seconds to soften the battery adhesive.
[* black] Move the iOpener to the right (away from the rear-facing camera), and let the iOpener sitkeep it there for another 90 seconds.
[* black] Finally, moveplace the iOpener tonear the right-hand edge of the iPad for 90 seconds.
[* [* icon_caution] Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than 30 seconds.
[* black] Place the heated iOpener in the center of the back of the iPad. LetKeep it sit there for 90 seconds to soften the battery adhesive.
[* black] Move the iOpener to the right (away from the rear-facing camera), and let the iOpener sitkeep it there for another 90 seconds.
[* black] Finally, moveplace the iOpener tonear the right-hand edge of the iPad for 90 seconds.
[* icon_note] You will likely need to repeat this step several times throughout the rest of the procedure to ensure the adhesive remains soft.
[* icon_note] The iOpener may cool significantly between sittings—ifsignificantly. If so, reheat it does, reheat for another 30 seconds between each position.
[* icon_note] The iOpener may cool significantly between sittings—ifsignificantly. If so, reheat it does, reheat for another 30 seconds between each position.