#1단계의 변경 사항
단계 라인
| [title] Remove 10 screws | |
| [* black] Do not remove the footpad on the upper left, there are no screws under any of the footpads on this model of Satellite | |
| - | [* black] Once screws are out, slide plastic razor, credit card or guitar pick |
| + | [* black] Once all of the screws are out, slide you tool of choice between top and bottom (plastic razor, credit card or guitar pick) |
| [* black] Start at front of machine, and work your way around to the black hinge side. | |
| [* black] The black hinge side looks almost like it is a separate piece which the silver bottom slides under. Nope! It is attached to the rest of the bottom. | |
| [* black] Once you have separated the silver areas, lift the front of the bottom slightly, and push backwards horizontally towards the hinge side. The backside black area "cups" the hinge area, you can not lift it straight up like the rest of the bottom. | |
| - | [* black] Note in second picture the sideview after the bottom has been removed. Don't worry about that on/off button. It stays with the bottom. There are no connectors of any sort between bottom shell and rest of laptop. That button pushes through and makes contact with a contact switch attached to the motherboard. |
| + | [* black] As you remove the bottom, do not worry about the on/off button. It is attached to the bottom shell, and has no connection to the motherboard. |
| + | [* black] The 2nd picture is a side view of the on/off button area after the bottom has been removed. There are no connections or cables of any sort between bottom shell and rest of laptop. |