Skip to main content

#3 단계의 변경 사항

Ritchie- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Use your fingernail or the edge of a spudger to carefully flip up the touchscreen ribbon cable retaining flap. The flap sandwiches the ribbon cable between itself and the metal contacts. It is hinged at the back and is fragile, use little force to pop it open from the front as shown.
[* black] Use your fingernail or the edge of a spudger to carefully flip up the touchscreen ribbon cable retaining flap. The flap sandwiches the ribbon cable between itself and the metal contacts. It is hinged at the back and is fragile, use little force to pop it open from the front as shown.
[* icon_caution] Make sure you are flipping up the retaining flap, '''not''' the socket itself.
[* black] Use the tip of a spudger to pull the touchscreen ribbon cable straight out of its socketfrom between the flap and the contacts.
[* black] Use the tip of a spudger to pull the touchscreen ribbon cable straight out of its socketfrom between the flap and the contacts.