주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Ritchie- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use your fingernail or the flat edge of a spudger to carefully flip up the upper LCD ribbon cable retaining flap. The retaining flap is the black plastic clip. It is hinged at the back so should be opened from the front as shown.
[* black] Use your fingernail or the flat edge of a spudger to carefully flip up the upper LCD ribbon cable retaining flap. The retaining flap is the black plastic clip. It is hinged at the back so should be opened from the front as shown.
[* icon_caution] Make sure you are flipping up the retaining flap, '''not''' the socket itself.
[* black] Pull the motherboard away from the DS Lite to separate the upper LCD ribbon cable from its socket on the motherboard.
[* black] Remove the motherboard from the DS Lite.