주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.
[* icon_caution] Be careful not to break any components off the surrounding area on the logic board as you pry.
[* black] Remove the rear camera from the iPhone.
+[* black] Before reassembly, be sure to clean all metal-to-metal contact points on the rear camera (***not*** the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.