주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

will- 에 의해 수정

편집 거부됨 완료자 David Hodson

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.
[* icon_caution] Be careful not to break any components off the surrounding area on the logic board as you pry upwards.
[* black] Remove the rear camera from the iPhone.
+[* black] Careful, there is a tab, on the upper right corner of the camera, under the display cable. Remove camera by angling to left.
[* icon_caution] Be careful not to scratch the back of the display assembly after the removal of the rear facing camera.