주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

davec2468- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Open the battery cover.
[* icon_note] To open, push
compartment door by sliding the black slidelatch to the right, then pullright and pulling the coverdoor down.
[* black] Remove the batteries from the compartment.

[* black] Unscrew the three Phillips screws (shown) located inside of the battery case using the #00 screwdriver that also hold on the top panel. They are 7.4 mm, 4.9mm, and 4.9 mm from left to right.
[* icon_reminder] Remember to remove the batteries to get to the screws
compartment.
[* black] Open the battery cover.
[* icon_note] To open, push
compartment door by sliding the black slidelatch to the right, then pullright and pulling the coverdoor down.
[* black] Remove the batteries from the compartment.

[* black] Unscrew the three Phillips screws (shown) located inside of the battery case using the #00 screwdriver that also hold on the top panel. They are 7.4 mm, 4.9mm, and 4.9 mm from left to right.
[* icon_reminder] Remember to remove the batteries to get to the screws
compartment.