Skip to main content

#11 단계의 변경 사항

iRobot- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] Peel up the iSight and inverter board cables from above the left fan.
[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the fan up.
[* black] Place the fan above the Airport card. It is not necessary to entirely remove the fan from the computer.

이미지 1

이전 이미지가 없습니다

추가되었습니다