물건을 수리하세요 커뮤니티 상점

#2단계의 변경 사항

편집자 Alex Giannousis-

편집 승인됨 완료자 Alex Giannousis

이전
이후
변경 사항 없음

단계 라인

[* red] Using the 1.5 mm hex screwdriver, remove the screws from the end cap.
-[* red] ***Be sure to remember the location of each screw.*** In this step, the top screw is about .4" long, while the bottom three are about .15"
+[* icon_note] ***Be sure to remember the location of each screw.*** In this step, the top screw is about .4" long, while the bottom three are about .15"
[* black] Remove the end cap.