주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

편집자 Alex Giannousis-

편집 승인됨 완료자 Alex Giannousis

이전
이후
변경 사항 없음

단계 라인

-[* red] Using the 1.5 mm hex screwdriver, remove the screws from the end cap.
+[* red] Using the 1.5mm hex screwdriver, remove the screws from the end cap.
[* icon_note] Be sure to remember the location of each screw. The top screw is about .4" long, while the bottom three are about .15".
[* black] Remove the end cap.