주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

편집자 Alex Giannousis-

편집 승인됨 완료자 Alex Giannousis

이전
이후
변경 사항 없음

단계 라인

-[* red] Using the 1.5 mm hex screwdriver, remove the four screws from the rear of the case.
-[* orange] Also remove the screw on the bottom of the case.
+[* red] Using the 1.5mm hex screwdriver, remove the four screws from the rear of the case.
+[* orange] Remove the screw on the bottom of the case.
[* icon_reminder] Again, recall which screws go where. The bottom screw and the top-right screw are both .15". The two bottom-right screws are both .4".
[* icon_note] The top-middle screw is .15" but has a different size thread and a blue mark.