#8단계의 변경 사항
편집자 Wilson Fletcher-
편집 승인됨 완료자 Wilson Fletcher
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Beginning from the hole created by removing the drive bay in step 6 and moving in a counterclockwise direction, begin separating the base by gently prying between the seam separating the base from the mother board, using either your fingernail or a small flathead tool. | |
| - | [* icon_note] During this process you may hear small pops which is just the plastic releasing from the motherboard |
| + | [* icon_note] During this process you may hear small pops which is just the plastic releasing from the motherboard. |