iPad 2 Wi-Fi EMC 2415 Teardown 단계 #23 기록

#23단계의 변경 사항

편집자 Filip Kin- 2018년 6월 11일

편집 거부됨 완료자 Adam O'Camb

	[* black] iPad 2 Repairability Score: *2 out of 10* (10 is easiest to repair)
	[* green] The LCD is really easy to remove once the front panel is gone.
	[* green] Only standard Phillips screws were used -- no Pentalobular or Tri-Wing funny-business.
-	[* red] The front panel is now glued to the rest of the device, greatly increasing the chances of cracking the glass when trying to remove it.
+	[* red] The front panel is now glued to the rest of the device, greatly increasing the chances of cracking the glass when trying to remove it. As well as having the wifi antenna glued to the screen and screwed down to the body, leading to a high risk of destroying the wifi antenna.
	[* red] The LCD has foam sticky tape adhering it to the front panel, increasing chances of it being shattered during disassembly.
	[* red] The battery is very securely stuck down to rear case, and you have to remove the logic board to remove it.
	[* red] You can't access the front panel's connector until you remove the LCD.
	[* black] Historical note: We initially awarded the iPad 2 a 4 out of 10, but in the process of writing our repair manual realized that it was far more difficult to repair than originally suspected.