주요 콘텐츠로 건너뛰기

#1 단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 에 의해 Andrew Optimus Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Using the Phillips #0 screwdriver removeRemove the following ten screws:
[* red] Three 14.4 mm Phillips #00 screws
[* orange] Three 3.5 mm Phillips #00 screws
[* yellow] Four 3.5 mm shouldered Phillips #00 screws
[* black] When reassembling apply a very small bit of glue (Loctite) to each screw to prevent them from vibrating out.
[* black] Using the Phillips #0 screwdriver removeRemove the following ten screws:
[* red] Three 14.4 mm Phillips #00 screws
[* orange] Three 3.5 mm Phillips #00 screws
[* yellow] Four 3.5 mm shouldered Phillips #00 screws
[* black] When reassembling apply a very small bit of glue (Loctite) to each screw to prevent them from vibrating out.