주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Arthur Shi- 에 의해 수정

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use your fingernail to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Use the tip of a spudger to pull the keyboard ribbon cable out of its socket.
[* icon_noteicon_reminder] The ribbon cable ismay be difficult to insert again. Useinsert. If you are having trouble, temporarily attach a piece of electricians tape stuck to the ribbon (see comments)cable to help you guide the cable into the socket.
[* icon_noteicon_reminder] The ribbon cable ismay be difficult to insert again. Useinsert. If you are having trouble, temporarily attach a piece of electricians tape stuck to the ribbon (see comments)cable to help you guide the cable into the socket.