주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

#1단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use the edge of a spudger to gently pry the fan connector up and out of its socket on the logic board.
[* icon_note] It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.
[* icon_caution] The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

이미지 2

이전 이미지 없음

추가

이미지 3

이전 이미지 없음

추가