주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

편집자 Sarah Westberg-

편집 승인됨 완료자 Sarah Westberg

이전
이후
변경 사항 없음

단계 라인

-[* red] Open the ZIF connector, the black locker part over the wire ribbon in the motherboard, and remove the wire ribbon that connects the motherboard and the camera.
+[* red] Open the ZIF connector, the black lock part over the wire ribbon in the motherboard, and remove the wire ribbon that connects the motherboard and the camera.
[* icon_note] The camera is located on the top left, above the motherboard.
-[* icon_caution] The camera is usually covered with tape or material. Remove it, and peel the camera off with tweezers for safety.
+[* icon_note] The camera is usually covered with tape or material. Remove it, and peel the camera off with tweezers for safety.