#10단계의 변경 사항
편집자 MissHeather-
편집 승인됨 완료자 MissHeather
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [title] Remove front screen | |
| [* black] Apply a heat gun or iOpener to front of screen to allow it to warm up the glue. | |
| - | [* black] Use opening tool and work your way around the front of the screen. You may have to alternate applying |
| - | [* black] Be careful not |
| + | [* black] Use opening tool and work your way around the front of the screen. You may have to alternate applying the heat and prying to get it loose enough to separate. |
| + | [* black] Be careful not overdo the heat. Use a low temperature and take your time to separate the screen. |
| [* black] Clean the black backing off of any glass still sticking to it. Mine had a lot so I had to scrape for awhile to get all the little pieces off to have a clean surface to apply the new replacement screen. | |
| [* black] Apply new screen to black backing. |