#2단계의 변경 사항
편집자 James Burton-
편집 승인됨 완료자 Anthony Fassler
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* red] Remove all nine screws from the bottom of the device using a T5 screwdriver. | |
| [* orange] Remove two additional screws, if present, from beneath the rubber pads. (Pry up each rubber pad to access its screw.) | |
| - | [* black] Carefully remove the bottom cover. |
| + | [* black] Carefully remove the bottom cover. The cover doesn't just lift up, you have to lift it to a approx. 45° angle, then pull towards the exterior (there are two small plastic claws that maintain the cover attached) |