주요 콘텐츠로 건너뛰기

#4 단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 에 의해 Sam Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Temporarily puticon_note] In order to remove the LCD back intofront panel assembly, the body ofribbon cable needs to slide out between the iPad 2case and the LCD. You'll need to move the LCD to make some room.
[* icon_caution] Be very careful when moving the LCD, and do not attempt to
remove it from the iPad—its cable will remain connected while it is rotated over.
[* black] Lift the LCD from its long edge farthest from the digitizer cable and gently flip it toward the rear case—like closing a book.
[* black] While holding the LCD up, gently slide
the front panel, beingpanel away from the iPad. Be careful not to damagesnag the digitizer cable inon the processrear case or LCD.
[* black] Set the LCD back into the body for safekeeping
.
[* black] Temporarily puticon_note] In order to remove the LCD back intofront panel assembly, the body ofribbon cable needs to slide out between the iPad 2case and the LCD. You'll need to move the LCD to make some room.
[* icon_caution] Be very careful when moving the LCD, and do not attempt to
remove it from the iPad—its cable will remain connected while it is rotated over.
[* black] Lift the LCD from its long edge farthest from the digitizer cable and gently flip it toward the rear case—like closing a book.
[* black] While holding the LCD up, gently slide
the front panel, beingpanel away from the iPad. Be careful not to damagesnag the digitizer cable inon the processrear case or LCD.
[* black] Set the LCD back into the body for safekeeping
.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 이미지가 없습니다

추가