주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

codyduncum- 에 의해 수정

편집 거부됨 완료자 Jake Devincenzi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Temporarily put the LCD back into the body of the iPad 2 and remove the front panel, being careful not to damage the digitizer cable in the process.
[* red] If you are replacing the front panel with a new one, make sure to transfer over the metal camera bracket and the home button assembly. Both can be removed using a spudger and heat.
[* black] On the new front panel, there is a small strip with two holes attached to the digitizer cable. It is ok to remove that before installation.