주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.
[* icon_caution] Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.
[*
black] Lift the LCD from its long edge closest to the volume buttons and rotategently flip it out of the rear casecase—like turning the page in a book.
[* black] LaySet the LCD face down on the front panel as seen in the second picturepanel.
[* icon_note] The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.
[* icon_caution] Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.
[*
black] Lift the LCD from its long edge closest to the volume buttons and rotategently flip it out of the rear casecase—like turning the page in a book.
[* black] LaySet the LCD face down on the front panel as seen in the second picturepanel.