주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the following two screws:
[* red] One 3.3 mm Phillips screw
[* orange] One 2.1 mm Phillips screw
[* black] Lift the metal retainer clip straight up from its recess in the rear panel.
-[* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear camera.
+[* icon_caution] Be sure the small thermal pad is attached to the metal retaining clip as seen in the third picture when replacing the rear facing camera.