주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Jonas Kvale- 에 의해 수정

편집 거부됨 완료자 Walter Galan

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Remove the following eight screws:
[* red] One 4.5 mm Phillips near the modem.
[* orange] Three 6 mm Phillips near the display.
- [* yellow] Two large 7.5 mm Phillips with attached springs.
+ [* yellow] Two large 7.5 mm Phillips with attached springs. Be careful when removing these, the whole screw may pop out of the logicboard.
[* green] Two 13 mm Phillips, one on the lower left side of the heat sink and one between the fan and the optical drive.