주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

David Hodson- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Gently lift the bottom of the case from the device.
-[* icon_caution] There are still two cables connecting the mother board to the case, so be sure not to pull the case all the way off.
-[* black] Use a plastic opening tool to gently lift the two connectors from the motherboard.
+[* black] Lift the bottom edge of the lower case off the rest of the 3DS.
+[* icon_caution] There are still two ribbon cables connecting the mother board to the case, so be sure not to pull the lower case all the way off.
+[* black] Use a plastic opening tool to pry the shoulder button ribbon cables off their sockets on the motherboard.
[* black] Remove the lower case from the device.