주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.
[* icon_caution] Do not lift the AirPort board too high, you could damage the contacts or socket.
[* black] Pull the AirPort board straight out of its socket on the logic board.
+ [* icon_note] There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board, or transfer it to your replacement board.