Skip to main content

#2 단계의 변경 사항

Alex Lin- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* blue] These three are the easiest tabs to remove. They are located on the back side of the printer.
[* black] Push the tab in with one of the plastic opening tools.
[* black]
Keep the tab pushed in by leveraging the tool between the tab and the hole. Pull up on the case so that the tab doesn't lock back into place.
[* black] Push the tab in with one of the plastic opening tools.
[* black]
Keep the tab pushed in by leveraging the tool between the tab and the hole. Pull up on the case so that the tab doesn't lock back into place.
[* black] Repeat this process with the furthermost right tab, then proceed with the middle tab.