주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Alex Lin- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] As indicated by the first picture, there are two tabs to be released onFrom the front of the printer.
[* black] The second picture
printer, there is a tab in the right tab, pictured from the front.
[* black] This would be the
lower left corner. This tab if facingis more difficult to remove. Push in towards the printer.
[* black] A picture
blue sticker of the left tab is missing, but is locatedprinter while pulling up on the other sidecase at the same time.
[* blue] Viewing the tab hole from the bottom
of the print tray.
[* black] These tabs can be somewhat more difficult
printer.
[* yellow] Zoomed in on the tab hole
. You will need to insert one of the recommended tools into the marked holeshole to completely release the tabs.tab.
[* icon_caution] This tab is the easiest to break so be very careful!
[* black] As indicated by the first picture, there are two tabs to be released onFrom the front of the printer.
[* black] The second picture
printer, there is a tab in the right tab, pictured from the front.
[* black] This would be the
lower left corner. This tab if facingis more difficult to remove. Push in towards the printer.
[* black] A picture
blue sticker of the left tab is missing, but is locatedprinter while pulling up on the other sidecase at the same time.
[* blue] Viewing the tab hole from the bottom
of the print tray.
[* black] These tabs can be somewhat more difficult
printer.
[* yellow] Zoomed in on the tab hole
. You will need to insert one of the recommended tools into the marked holeshole to completely release the tabs.tab.
[* icon_caution] This tab is the easiest to break so be very careful!

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지 없음

추가