메인 컨텐츠로 가기

#3 단계의 변경 사항

Alex Lin- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* icon_note] Note: It is recommended that step 3 and step 4 be completed simultaneously. The tabs are identical just on opposite sides.
[* black] FromViewing from the front of the printer, there is a tab in the lower left corner. Push in towards the blue sticker of the printer while pulling up on the case at the same time.
[* black] FromViewing from the front of the printer, there is a tab in the lower left corner. Push in towards the blue sticker of the printer while pulling up on the case at the same time.
[* blue] Viewing the tab hole from the bottom of the printer.
[* yellow] Zoomed in on the tab hole. You will need to insert one of the recommended tools into the marked hole to completely release the tab.
[* black] Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open.
[* yellow] Zoomed in on the tab hole. You will need to insert one of the recommended tools into the marked hole to completely release the tab.
[* black] Push in towards the blue sticker of the printer while pulling up on the case at the same time. Use one of the tools to keep the tab pried open.
[* icon_caution] This tab is the easiest to break so be very careful.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전