Skip to main content

#5 단계의 변경 사항

Alex Lin- 에 의해 수정

승인 대기 중

삭제되었습니다
추가되었습니다
변경 사항 없음

스텝 라인

[* black] The final two tabs can be somewhat trickier.
[* black] A long, skinny device will be required for the removal of one of these tabs.
[* black] Pictured
Viewing from the front, they are located in the side viewsback left and right corners of the associated tabsprinter.
[* blackorange] The release points for the tabs are located in holes on the depressed area of the base (darker piece).
[* green] View from under the printer.
[* violet] One or more of the tools will be required for the removal of these tabs. Use it to push out the tab. Once it releases push in towards the printer (viewing from the side) and pull up on the case.
[* black] The final two tabs can be somewhat trickier.
[* black] A long, skinny device will be required for the removal of one of these tabs.
[* black] Pictured
Viewing from the front, they are located in the side viewsback left and right corners of the associated tabsprinter.
[* blackorange] The release points for the tabs are located in holes on the depressed area of the base (darker piece).
[* green] View from under the printer.
[* violet] One or more of the tools will be required for the removal of these tabs. Use it to push out the tab. Once it releases push in towards the printer (viewing from the side) and pull up on the case.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 이미지가 없습니다

추가되었습니다