#1단계의 변경 사항
편집자 Marty Rippens-
편집 승인됨 완료자 Marty Rippens
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* icon_note] Before starting the disassemble, make sure the device is powered off. | |
| - | [* black] |
| + | [* black] Flip the device on its front to display the back of the device. |
| [* red] Unscrew the 4 screws using the PH000 drill bit from the iFixit toolkit. | |
| [* icon_reminder] Don't forget to place the screws aside in a safe location, perhaps use a magnetic board to store them. You will need the screws to put the device back together. |