주요 콘텐츠로 건너뛰기

#3 단계의 변경 사항

MicroBassMan- 에 의해 수정

편집 승인됨 에 의해 Jeff Suovanen

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[title] Disconnection
[* black] Once display is fully unglued from the frame, carefully lift it up and locate the display connector.
[* black] Using the same small plastic tool, carefully remove the yellow tape off the connector.
[* red] Now carefully undo the black connector lock by lifting it up in the direction of the red arrow.
[* black] Lastly slide the display cable off the connector. It should easily slide off, if not make sure the black lock is fully unlatched.
[* icon_caution] DO NOT TRY TO MOVE OR PRY ON GRAY PART OF CONNECTOR