How to reduce ChiliCube noise level by replacing fans 단계 #7 기록

#7단계의 변경 사항

편집자 Netmammal- 2016년 4월 26일

편집 승인됨 완료자 Netmammal

	[title] Fan bracket/shroud removal
-	[* ~~black~~] These instructions are written as you will only replace one fan, but you may want to do these steps to both fans at the same time.
+	[* icon_note] These instructions are written as you will only replace one fan, but you may want to do these steps to both fans at the same time.
	[* black] The 2 screws supporting the fan are on the heat sink side of the bracket/shroud, so we remove the bracket first, so we can get to those screws next.
	[* black] Remove four screws holding the bracket/shroud to the heat sink.
	[* black] Tilt the bracket/shroud out. It may take a little more force than you would like. Thats OK. Try sliding it side-to-side as well.