주요 콘텐츠로 건너뛰기

#12단계의 변경 사항

편집자 Netmammal-

편집 승인됨 완료자 Netmammal

이전
이후
변경 사항 없음

단계 라인

[title] Attach fan so 3-way switch will reach
[* black] If you do go with the 3-speed fan used here, look ahead in instructions to see where the switch gets positioned, then attach fan appropriately to the bracket/shroud plate.
-[* black] Note direction fan is attached. The side with cable lead-in to motor, (and usually the only label or fancier of the two hub labels), that side faces inward towards the heat sink, and the bracket/shroud plate.
-[* black] Don't freak out if you think you can't fish the cable through the shroud the right way. You can pass the whole fan through the shroud hole on the 45º.
+[* icon_note] Note direction fan is attached. The side with cable lead-in to motor, (and usually the only label or fancier of the two hub labels), that side faces inward towards the heat sink, and the bracket/shroud plate.
+[* icon_note] Don't freak out if you think you can't fish the cable through the shroud the right way. You can pass the whole fan through the shroud hole on the 45º.