물건을 수리하세요 커뮤니티 상점

#14단계의 변경 사항

편집자 Netmammal-

편집 승인됨 완료자 Netmammal

이전
이후
변경 사항 없음

단계 라인

[title] Create spot for 3-way switch
[* black] The 3-way switch will be positioned so that you can use a pencil point poked through the grill to change the setting after your ChiliCube is re-assembled.
[* black] I did not photo it, but I used a dremel tool to cut part of the flange which is just behind the grill on the front-side of the cube when it is upright.
-[* black] The switch will probably stay here on its own, but add a cable tie, strung through two tiny holes drilled on either side of the switch to make sure it does not pop out during reassembly.
+[* black] The switch will probably stay here on its own, but add a cable tie, strung through two tiny holes drilled on either side of the switch to make sure it does not move during reassembly and use.