#15단계의 변경 사항
단계 라인
| [title] Cable tie down the 3-way switches | |
| + | [* icon_caution] Again, if you are going to keep the water retaining safety feature, do not drill these holes. |
| + | [* icon_note] It might be possible to use silicon caulk to seal these penetrations, and around the switches. It is just very hard to verify the security of those seals. |
| [* black] Drill two small holes on each end of the where the switch will go, and then loop a cable tie through to hold the switch in position. |