Skip to main content

#2 단계의 변경 사항

jqadamziz2- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] Insert a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closest
assembly.Be very careful when opening, #4 cable may be stuck to the home button. Gently pry theback of display assemblyand will rip in two if you open it up from its bezelto far to fast.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] Insert a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closest
assembly.Be very careful when opening, #4 cable may be stuck to the home button. Gently pry theback of display assemblyand will rip in two if you open it up from its bezelto far to fast.

이미지 1

이전 버전

새로운 버전