주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Luke Soules- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* black] Inserticon_note] If you don't have a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closestsuction cup, you may be able to the home button. Gently pry the display assembly up from its bezeluse some wide scotch tape or something similar without too much glue.
[* black] Inserticon_note] If you don't have a metal spudger into the seam between the silver front bezel and the black display assembly on the edge closestsuction cup, you may be able to the home button. Gently pry the display assembly up from its bezeluse some wide scotch tape or something similar without too much glue.

이미지 1

이전 버전

새로운 버전