주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Mike Solin- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the metal handle from the suction cup. It's easier and safer to grip the suction cup's base instead of the metal handle.
[* icon_caution] Be very careful when opening the iPhone so that the cables under the display are not severed.
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. It may help to rock the suction cup back and forth to remove the display assembly.
[* icon_note] There is a rubber gasket between the silver front bezel and black display assembly. A bit of force is required in this step to separate the iPhone's display assembly. It may help to rock the suction cup back and forth to remove the display assembly.
[* black] Use a small suction cup near the Home button to gently pull up the bottom portion of the iPhone's display assembly.
[* icon_note] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape or packing tape may be used.
[* icon_note] If the display assembly is too damaged to allow the suction cup to adhere, tape with a strong adhesive such as duct tape or packing tape may be used.