메인 콘텐츠로 스킵하기

#4 단계의 변경 사항

Jake Devincenzi- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_noteblack] Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."
[* red

[* icon_caution
] Be careful to insert the spudger from the left, as shown in the picture. If you try to pry up the ribbon from the right, you could damage the ribbon connector and need to replace the display!
[* icon_noteblack] Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1."
[* red

[* icon_caution
] Be careful to insert the spudger from the left, as shown in the picture. If you try to pry up the ribbon from the right, you could damage the ribbon connector and need to replace the display!
[* icon_note] All connectors except the ribbon connector mentioned in step 6 release upwards.