주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Alberto- 에 의해 수정

편집 승인됨 완료자 Scott Havard

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Continue to hold the display assembly with one hand, and use your other hand and a spudger to disconnect the black ribbon cable labeled "1". (Cable 1 is for the display)
[* icon_caution] Be careful to insert the spudger from the left, as shown in the picture (UNDER THE RIBBON). If you try to pry up the ribbon from the right, you could damage the ribbon connector and need to replace the display!
[* icon_note] All connectors except the ribbon connector "3" mentioned in step 7 release upwards.
[* icon_note] All connectors except the ribbon connector "3" mentioned in step 7 release upwards.