주요 콘텐츠로 건너뛰기

#11단계의 변경 사항

miqueiasmiller- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Remove the following 8 screws:
[* red] Five 2.3 mm Phillips #00 screws with partial threads securing the logic board to the rear panel.
[* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera. There's a little metallic piece that is used to fix the camera which is fixed by the most right-bottom screw.
[* orange] Two 2.3 mm Phillips #00 screws with full threads securing the logic board and camera. There's a little metallic piece that is used to fix the camera which is fixed by the most right-bottom screw.
[* yellow] One 2.9 mm Phillips #00 screw from beneath the "Do not remove" sticker.