주요 콘텐츠로 건너뛰기

#13단계의 변경 사항

David Mitchell- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector. There is a tiny, gold grounding strap at the case, an inch below the spudger in the photo. It is soldered to the logic board. I cut it at the metal rim with a razor blade. On reassembly, it rests against the case, and my phone works fine. Maybe I was lucky.
[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector. There is a tiny, gold grounding strap at the case, an inch below the spudger in the photo. It is soldered to the logic board. I cut it at the metal rim with a razor blade. On reassembly, it rests against the case, and my phone works fine. Maybe I was lucky.
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removed.