주요 콘텐츠로 건너뛰기

#13단계의 변경 사항

alex- 에 의해 수정

편집 거부됨 완료자 Jake Devincenzi

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Use a spudger to gently pry up the end of the logic board closest to the dock connector.
[* icon_caution] There is a small golden grounding tab on logic board adjacent to the 'do not remove sticker'. Be VERY careful this does not snag on the side of the case when prying up the logic board; it breaks easily. If you have signal problems after removing the logic board, check this ground tab.
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removedremoved....
[* icon_note] If the board won't lift up, double check to make sure all the screws securing the logic board have been removedremoved....