주요 콘텐츠로 건너뛰기

#14 단계의 변경 사항

Luke Soules- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Slide the logic board towards the dock connector and out of the iPhone.
[* black] When replacing the logic board after installing battery, make sure to set the top section of the logic board (where the simSIM tray is) in place before settling the rest of the board in place. This is important, as sometimes the simSIM card slot will not align into place. Once the top section is in place, the bottom section will have a small bit jutting that can be wiggle / maneuvered into place. You will know the logic board is correctly installed when the simSIM tray is aligned with the opening in the iphoneiPhone case and the camera module seats neatly into its place.
[* black] When replacing the logic board after installing battery, make sure to set the top section of the logic board (where the simSIM tray is) in place before settling the rest of the board in place. This is important, as sometimes the simSIM card slot will not align into place. Once the top section is in place, the bottom section will have a small bit jutting that can be wiggle / maneuvered into place. You will know the logic board is correctly installed when the simSIM tray is aligned with the opening in the iphoneiPhone case and the camera module seats neatly into its place.